yinuo_project/气动扳手/23.8.30/TmsKey/data/BoltModeStructData.cpp

#include "BoltModeStructData.h"
#include <sstream>
#include <iomanip>
#include <ctime>

#include "Utils.h"

BoltModeStructData::BoltModeStructData()
    : m_data(nullptr)
{
}

BoltModeStructData::BoltModeStructData(BoltModeParam_t *data)
    : m_data(nullptr)
{
    setData(data);
}

BoltModeStructData::~BoltModeStructData()
{
    if(m_data != nullptr)
    {
        for(int i=0; i<2; i++)
        {
            m_data->format[i].diameterList.clear();
            m_data->format[i].typeList.clear();
            m_data->format[i].torqueList.clear();
        }
        delete m_data;
        m_data = nullptr;
    }
}

Data* BoltModeStructData::clone()
{
    Data* data = new BoltModeStructData();
    data->copy(this);
    return data;
}

void BoltModeStructData::copy(Data* data)
{
    BoltModeStructData *dt = dynamic_cast<BoltModeStructData *>(data);
    if(dt->getData() == nullptr)
    {
        return;
    }

    if(m_data == nullptr)
    {
        m_data = new BoltModeParam_t();
    }

    m_data->name = dt->getData()->name;
    for(int i=0; i<2; i++)
    {
        m_data->format[i].diameterList.clear();
        m_data->format[i].typeList.clear();
        m_data->format[i].torqueList.clear();

        //m_data->format = dt->getData()->format;
        std::copy(dt->getData()->format[i].diameterList.begin(), dt->getData()->format[i].diameterList.end(), std::back_inserter(m_data->format[i].diameterList));
        std::copy(dt->getData()->format[i].typeList.begin(), dt->getData()->format[i].typeList.end(), std::back_inserter(m_data->format[i].typeList));
        std::copy(dt->getData()->format[i].torqueList.begin(), dt->getData()->format[i].torqueList.end(), std::back_inserter(m_data->format[i].torqueList));
    }
}

void BoltModeStructData::copy(Data& data)
{
    BoltModeStructData *dt = dynamic_cast<BoltModeStructData *>(&data);
    if(dt->getData() == nullptr)
    {
        return;
    }

    if(m_data == nullptr)
    {
        m_data = new BoltModeParam_t();
    }

    m_data->name = dt->getData()->name;
    for(int i=0; i<2; i++)
    {
        m_data->format[i].diameterList.clear();
        m_data->format[i].typeList.clear();
        m_data->format[i].torqueList.clear();

        //m_data->format = dt->getData()->format;
        std::copy(dt->getData()->format[i].diameterList.begin(), dt->getData()->format[i].diameterList.end(), std::back_inserter(m_data->format[i].diameterList));
        std::copy(dt->getData()->format[i].typeList.begin(), dt->getData()->format[i].typeList.end(), std::back_inserter(m_data->format[i].typeList));
        std::copy(dt->getData()->format[i].torqueList.begin(), dt->getData()->format[i].torqueList.end(), std::back_inserter(m_data->format[i].torqueList));
    }
}

int BoltModeStructData::length()
{
    int length = 0;

    length += 10;    // 扳手名称
    for(int i=0; i<2; i++)
    {
        length += 1;     // 制式
        length += 1;     // 直径数量
        length += 10 * m_data->format[i].diameterList.size();   // 直径名称
        length += 1;     // 等级数量
        length += 10 * m_data->format[i].typeList.size();   // 等级名称
        length += 4 * m_data->format[i].diameterList.size() * m_data->format[i].typeList.size();   // 扭矩值
    }
    return length;
}

std::string BoltModeStructData::toStr()
{
    std::stringstream ss;
    ss << "name : " << m_data->name << std::endl;

    for(int i=0; i<2; i++)
    {
        //ss << "format : " << ((m_data->format == 0) ? (std::string("公制")) : (std::string("英制"))) << std::endl;
        ss << "format : " << ((i == 0) ? std::string("公制") : std::string("英制")) << std::endl;
        ss << "diameter : ";

        std::list<std::string>::iterator diameterIter = m_data->format[i].diameterList.begin();
        while(diameterIter != m_data->format[i].diameterList.end())
        {
            ss << *diameterIter << ", ";
            diameterIter++;
        }
        ss << std::endl;

        std::list<std::string>::iterator typeIter = m_data->format[i].typeList.begin();
        while(typeIter != m_data->format[i].typeList.end())
        {
            ss << *typeIter << ", ";
            typeIter++;
        }
        ss << std::endl;

        std::list<int>::iterator torqueIter = m_data->format[i].torqueList.begin();
        while(torqueIter != m_data->format[i].torqueList.end())
        {
            ss << *torqueIter << ", ";
            torqueIter++;
        }
        ss << std::endl;
    }

    return ss.str();
}

// 1. 0 共 1 字节： 制式
// 2. 1-10 共 10 字节： 扳手名称
// 3. 11 共 1 字节： 直径数量
// 4. 12-21 共10字节：直径名称
// 5. 重复4
// 6. 22 共 1 字节：等级数量
// 7. 23-32 共10字节：等级名称
// 8. 4 共4字节： 扭矩
// 9. 重复 8
std::string BoltModeStructData::toByteStr()
{
    std::string s;

    // 名称
    char name[11];
    memset(name, 0, sizeof(name));
    memcpy(name, m_data->name.c_str(), m_data->name.length() <= 10 ? m_data->name.length() : 10);
    name[10] = '\0';
    s.append(name, 10);

    for(unsigned char i=0; i<2; i++)
    {
        // 制式
        //s.append(Utils::charToByteStr(m_data->format));
        s.append(Utils::charToByteStr(i));

        // 螺栓直径数量
        unsigned char diameterCount = m_data->format[i].diameterList.size();
        s.append(Utils::charToByteStr(diameterCount));

        std::list<std::string>::iterator diameterIter = m_data->format[i].diameterList.begin();
        while(diameterIter != m_data->format[i].diameterList.end())
        {
            char diameter[11];
            memset(diameter, 0, sizeof(diameter));
            memcpy(diameter, (*diameterIter).c_str(), (*diameterIter).length() <= 10 ? (*diameterIter).length() : 10);
            diameter[10] = '\0';
            s.append(diameter, 10);
            diameterIter++;
        }

        // 螺栓等级数量
        unsigned char typeCount = m_data->format[i].typeList.size();
        s.append(Utils::charToByteStr(typeCount));

        std::list<std::string>::iterator typeIter = m_data->format[i].typeList.begin();
        while(typeIter != m_data->format[i].typeList.end())
        {
            char type[11];
            memset(type, 0, sizeof(type));
            memcpy(type, (*typeIter).c_str(), (*typeIter).length() <= 10 ? (*typeIter).length() : 10);
            type[10] = '\0';
            s.append(type, 10);
            typeIter++;
        }

        // 扭矩
        // 检查扭矩数量是否正确，如果缺少，后续补0，如果有多，调整数量
        int torqueCount = m_data->format[i].torqueList.size();
        if(torqueCount < diameterCount * typeCount)
        {
            for(int i=torqueCount; i<diameterCount * typeCount; i++)
            {
                m_data->format[i].torqueList.push_back(0);
            }
        }
        torqueCount = diameterCount * typeCount;
        //s.append(Utils::charToByteStr(torqueCount));  -- 协议中无扭矩数量

        std::list<int>::iterator torqueIter = m_data->format[i].torqueList.begin();
        int nCount = 0;
        while(torqueIter != m_data->format[i].torqueList.end())
        {
            int torque = *torqueIter;
            s.append(Utils::intToByteStr(torque));

            nCount++;
            if(nCount >= torqueCount)
            {
                break;
            }

            torqueIter++;
        }
    }

    return s;
}

std::string BoltModeStructData::toHexStr()
{
    std::string s = toByteStr();
    return Utils::strToHexStr(s);
}

bool BoltModeStructData::fromByteStr(std::string str)
{
    if(str.length() < 13)   // 名称10，制式1，直径数量1，型号数量1,。。。制式1，直径数量1，型号数量1
    {
        return false;
    }

    unsigned int pos = 0;

    // name
    m_data->name = str.substr(pos, 10);
    pos += 10;

    for(int i=0; i<2; i++)
    {
        // format
        //m_data->format = str.at(pos);
        unsigned char format = str.at(pos);
        pos++;

        // diameter
        unsigned char diameterCount = str.at(pos);
        pos++;
        for(int i = 0; i<diameterCount; i++)
        {
            std::string diameter = str.substr(pos, 10);
            pos += 10;
            m_data->format[i].diameterList.push_back(diameter);
        }

        // type
        unsigned char typeCount = str.at(pos);
        pos++;
        for(int i = 0; i<typeCount; i++)
        {
            std::string type = str.substr(pos, 10);
            pos += 10;
            m_data->format[i].typeList.push_back(type);
        }

        // torque
        for(int i=0; i<diameterCount * typeCount; i++)
        {
            std::string torque = str.substr(pos, 4);
            pos += 4;
            m_data->format[i].torqueList.push_back(Utils::byteStrToInt(torque));
        }
    }

    return true;
}

void BoltModeStructData::setData(BoltModeParam_t* data)
{
    if(m_data != nullptr)
    {
        delete m_data;
        m_data = nullptr;
    }
    m_data = data;
}

void BoltModeStructData::copyData(BoltModeParam_t* data)
{
    if(m_data == nullptr)
    {
        m_data = new BoltModeParam_t();
    }
    m_data->name = data->name;
    for(int i=0; i<2; i++)
    {
        m_data->format[i].diameterList.clear();
        m_data->format[i].typeList.clear();
        m_data->format[i].torqueList.clear();

        //m_data->format = data->format;
        std::copy(data->format[i].diameterList.begin(), data->format[i].diameterList.end(), std::back_inserter(m_data->format[i].diameterList));
        std::copy(data->format[i].typeList.begin(), data->format[i].typeList.end(), std::back_inserter(m_data->format[i].typeList));
        std::copy(data->format[i].torqueList.begin(), data->format[i].torqueList.end(), std::back_inserter(m_data->format[i].torqueList));
    }
}