#include "BaseSetupWidget.h"
#include "ui_BaseSetupWidget.h"
#include "Common.h"
#include "frame/Frame.h"
#include "device/Device.h"
#include "device/DeviceManager.h"
#include "logger/LogManager.h"
#include "SetupService.h"
#include "Utils.h"
#include "TmsKey.h"
#include <QRegExpValidator>
#include <QTimer>
#include <QMessageBox>
#include <QFileDialog>
#include <sstream>
#include <Qtxlsx>
#include <QDebug>

extern double gZoomValue;
extern unsigned char m_currType;

//const unsigned int gFieldCount = 17;
//tagRecordFile gTagRecordFile[gFieldCount] = {
//    {"帧类型", FIELD_TYPE_UCHAR, 1},
//    {"序号", FIELD_TYPE_USHORT, 2},
//    {"出厂编号", FIELD_TYPE_STRING, 8},
//    {"日期", FIELD_TYPE_DATETIME, 7},
//    {"设备名称", FIELD_TYPE_STRING, 16},
//    {"设备编号", FIELD_TYPE_STRING, 8},
//    {"操作人员", FIELD_TYPE_STRING, 16},
//    {"目标扭矩", FIELD_TYPE_UINT, 4},
//    {"实际扭矩", FIELD_TYPE_UINT, 4},
//    {"螺栓规格等级编号", FIELD_TYPE_USHORT, 2},
//    {"目标角度", FIELD_TYPE_USHORT, 2},
//    {"实际角度", FIELD_TYPE_USHORT, 2},
//    {"档位", FIELD_TYPE_UCHAR, 1},
//    {"对应扭矩", FIELD_TYPE_UINT, 4},
//    {"选定模式", FIELD_TYPE_UCHAR, 1},
//    {"运行时间", FIELD_TYPE_USHORT, 2},
//    {"拧紧结果", FIELD_TYPE_UCHAR, 1}
//};
const unsigned int gFieldCount = 19;
const unsigned char m_spannerType = 4;
tagRecordFile gTagRecordFile[gFieldCount] = {
    {"帧类型", FIELD_TYPE_UCHAR, 1},
    {"记录序号", FIELD_TYPE_UINT, 4},
    {"工具型号", FIELD_TYPE_STRING, 10},
    {"出厂编号", FIELD_TYPE_STRING, 8},
    {"日期", FIELD_TYPE_DATETIME, 7},
    {"设备名称", FIELD_TYPE_STRING, 16},
    {"设备编号", FIELD_TYPE_STRING, 8},
    {"操作人员", FIELD_TYPE_STRING, 16},
    {"对应压力", FIELD_TYPE_USHORT, 2},
    {"目标扭矩", FIELD_TYPE_UINT, 4},
    {"实际扭矩", FIELD_TYPE_UINT, 4},
    {"螺栓规格", FIELD_TYPE_STRING, 10},
    {"螺栓等级", FIELD_TYPE_STRING, 10},
    {"目标角度", FIELD_TYPE_USHORT, 2},
    {"实际角度", FIELD_TYPE_USHORT, 2},
    {"档位", FIELD_TYPE_UCHAR, 1},
    {"选定模式", FIELD_TYPE_UCHAR, 1},
    {"工作方式", FIELD_TYPE_UCHAR, 1},
    {"拧紧结果", FIELD_TYPE_UCHAR, 1}
};

tagRecordFile gTagRecordFileEng[gFieldCount] = {
    {"帧类型", FIELD_TYPE_UCHAR, 1},
    {"Number", FIELD_TYPE_UINT, 4},
    {"Product Type", FIELD_TYPE_STRING, 10},
    {"Serial Number", FIELD_TYPE_STRING, 8},
    {"Date", FIELD_TYPE_DATETIME, 7},
    {"User Equipment Item", FIELD_TYPE_STRING, 16},
    {"User Equipment Number", FIELD_TYPE_STRING, 8},
    {"Operator", FIELD_TYPE_STRING, 16},
    {"Work Pressure", FIELD_TYPE_USHORT, 2},
    {"Target Torque", FIELD_TYPE_UINT, 4},
    {"Actual Torque", FIELD_TYPE_UINT, 4},
    {"Bolt Size", FIELD_TYPE_STRING, 10},
    {"Bolt Strength", FIELD_TYPE_STRING, 10},
    {"Target Angle", FIELD_TYPE_USHORT, 2},
    {"Actual Angle", FIELD_TYPE_USHORT, 2},
    {"Gear", FIELD_TYPE_UCHAR, 1},
    {"Select Mode", FIELD_TYPE_UCHAR, 1},
    {"Work Pattern", FIELD_TYPE_UCHAR, 1},
    {"Fastening Result", FIELD_TYPE_UCHAR, 1}
};

BaseSetupWidget::BaseSetupWidget(QWidget *parent)
    : QWidget(parent)
    , ui(new Ui::BaseSetupWidget)
    //, m_sysStatus(SYS_STATUS_IDLE)
    , m_currCmd(FRAME_CMD_START)
    , m_bSucc(false)
{
    ui->setupUi(this);

    init();

    // 初始化定时器0，用于显示系统时间
    initTimer0();

    // 初始化文件记录定时器
    initRecordTimer();



//    // Excel初始化
//    m_excelObject = new QAxObject("Excel.Application");
//    // 是否可视化excel
//    m_excelObject->dynamicCall("SetVisible(bool Visble)", "false");
//    // 是否弹出警告窗口
//    m_excelObject->setProperty("DisplayAlerts", false);
}

BaseSetupWidget::~BaseSetupWidget()
{
    clearTimer0();

//    if(m_excelObject != nullptr)
//    {
//        m_excelObject->dynamicCall("Quit()");
//        delete m_excelObject;
//        m_excelObject = nullptr;
//    }

    delete ui;
}

void BaseSetupWidget::init()
{
    // 控件大小
    int nLabelWidth = 120 * gZoomValue;
    int nLabelHeight = gnDefaultLabelHeight * gZoomValue;
    ui->labelToolsUnlock->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelToolsSerialNumber->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelTimeSetting->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelUserEquitmentItem->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelUserEquitmentNo->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelOperatorSettings->setFixedSize(nLabelWidth, nLabelHeight);
    ui->labelRecordedData->setFixedSize(nLabelWidth, nLabelHeight);

    int nLineEditHeight = gnDefaultLineEditHeight * gZoomValue;
    ui->lineEditToolsUnlock->setFixedHeight(nLineEditHeight);
    ui->lineEditToolsSerialNumber->setFixedHeight(nLineEditHeight);
    ui->lineEditTimeSetting->setFixedHeight(nLineEditHeight);
    ui->lineEditUserEquitmentItem->setFixedHeight(nLineEditHeight);
    ui->lineEditUserEquitmentNo->setFixedHeight(nLineEditHeight);
    ui->lineEditOperatorSettings->setFixedHeight(nLineEditHeight);

    int nPushButtonWidth = 130 * gZoomValue;
    int nPushButtonHeight = gnDefaultPushButtonHeight * gZoomValue;
    int nWidgetHeight = nPushButtonHeight;
    ui->widget_7->setFixedHeight(nWidgetHeight);
    ui->pushButtonGetRecords->setFixedWidth(80 * gZoomValue);
    ui->pushButtonGetRecords->setFixedHeight(nPushButtonHeight);

    ui->pushButtonToolsUnlock->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonToolsSerialNumber->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonTimeSetting->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonUserEquitmentItem->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonUserEquitmentNo->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonOperatorSettings->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    ui->pushButtonDeleteRecordedData->setFixedSize(nPushButtonWidth, nPushButtonHeight);
    // 进度条不可用，不可见
    ui->progressBarGetRecords->setDisabled(true);
    ui->progressBarGetRecords->setValue(0);

    // 控件字体
    QString strStyleSheet = gstrStyleSheet.arg(gnFontSize * gZoomValue);
    ui->lineEditToolsUnlock->setStyleSheet(strStyleSheet);
    ui->lineEditToolsSerialNumber->setStyleSheet(strStyleSheet);
    // 时间不可编辑
    ui->lineEditTimeSetting->setEnabled(false);
    ui->lineEditTimeSetting->setStyleSheet(strStyleSheet);
    ui->lineEditUserEquitmentItem->setStyleSheet(strStyleSheet);
    ui->lineEditUserEquitmentNo->setStyleSheet(strStyleSheet);
    ui->lineEditOperatorSettings->setStyleSheet(strStyleSheet);

    // 定义只能输入数字的正则表达式
    QRegExp regx("[0-9]+$");
    //QValidator *validator1 = new QRegExpValidator(regx, ui->lineEditUserEquitmentNo);
    QValidator *validator = new QRegExpValidator(regx);

    // 设置解除锁定的密码最多输入8位数字
    ui->lineEditToolsUnlock->setValidator(validator);
    ui->lineEditToolsUnlock->setMaxLength(8);
    // 设置出厂编号最多输入8位数字
    ui->lineEditToolsSerialNumber->setValidator(validator);
    ui->lineEditToolsSerialNumber->setMaxLength(8);
    // 设置设备名称最多输入长度16，中文字算长度1，英文字符也是长度1
    ui->lineEditUserEquitmentItem->setMaxLength(8);
    // 设置设备编号最多输入8位数字
    ui->lineEditUserEquitmentNo->setValidator(validator);
    ui->lineEditUserEquitmentNo->setMaxLength(8);
    // 设置操作人员最多输入长度8，中文字算长度1，英文字符也是长度1
    ui->lineEditUserEquitmentItem->setMaxLength(8);


    // 解锁
    connect(ui->pushButtonToolsUnlock, SIGNAL(clicked()), this, SLOT(slot_pushButtonToolsUnlock_clicked()));
    // 出厂编号
    connect(ui->pushButtonToolsSerialNumber, SIGNAL(clicked()), this, SLOT(slot_pushButtonToolsSerialNumber_clicked()));
    // 设置时间
    connect(ui->pushButtonTimeSetting, SIGNAL(clicked()), this, SLOT(slot_pushButtonTimeSetting_clicked()));
    // 设置设备名称
    connect(ui->pushButtonUserEquitmentItem, SIGNAL(clicked()), this, SLOT(slot_pushButtonUserEquitmentItem_clicked()));
    // 设置设备编号
    connect(ui->pushButtonUserEquitmentNo, SIGNAL(clicked()), this, SLOT(slot_pushButtonUserEquitmentNo_clicked()));
    // 操作人员编辑
    connect(ui->pushButtonOperatorSettings, SIGNAL(clicked()), this, SLOT(slot_pushButtonOperatorSettings_clicked()));
    // 获取记录
    connect(ui->pushButtonGetRecords, SIGNAL(clicked()), this, SLOT(slot_pushButtonGetRecords_clicked()));
    // 清除记录
    connect(ui->pushButtonDeleteRecordedData, SIGNAL(clicked()), this, SLOT(slot_pushButtonDeleteRecordedData_clicked()));
}




//
// 初始化定时器
//
void BaseSetupWidget::initTimer0()
{
    m_timer0.stop();
    m_timer0.setInterval(100);//1ms定时器，类似于单片机的中断函数
    connect(&m_timer0, SIGNAL(timeout()),this,SLOT(slot_timer0_task()));
    //当记满1000时执行Timer0_Task
    m_timer0.start();
}

void BaseSetupWidget::clearTimer0()
{
    m_timer0.stop();
    disconnect(&m_timer0, SIGNAL(timeout()),this,SLOT(slot_timer0_task()));
}

//
// 定时器0的功能：在设置时间的lineEdit框中显示当前时间
//
void BaseSetupWidget::slot_timer0_task()
{
    QString d = QDate::currentDate().toString("yyyy-MM-dd");
    QString t = QTime::currentTime().toString("hh:mm:ss");
    ui->lineEditTimeSetting->setText(tr("%1 %2").arg(d).arg(t));
}

//
// 解除锁定
//
void BaseSetupWidget::slot_pushButtonToolsUnlock_clicked()
{
    logInfo("请求解锁...");
    char c[2] = {0};
    c[0] = 0x00;    // 0x00 解锁，0x01加锁
    c[1] = '\0';
    std::string s;
    s.append(c, 1);
    s.append(ui->lineEditToolsUnlock->text().toStdString());

    SetupService::GetInstance()->SendData(FRAME_CMD_SET_LOCK_STATUS, s);
}

//
// 设置出厂编号
//
void BaseSetupWidget::slot_pushButtonToolsSerialNumber_clicked()
{
    logInfo("请求设置出厂序列号...");
    SetupService::GetInstance()->SendData(FRAME_CMD_SET_SERIAL_NUMBER, ui->lineEditToolsSerialNumber->text().toStdString().substr(0, 8));
}

//
// 设置时间
//
void BaseSetupWidget::slot_pushButtonTimeSetting_clicked()
{
    logInfo(tr("请求设置日期时间..."));
    SetupService::GetInstance()->SendData(FRAME_CMD_SET_TIME);
}

//
// 设置设备名称
//
void BaseSetupWidget::slot_pushButtonUserEquitmentItem_clicked()
{
    logInfo(tr("请求设置设备名称..."));
    // 设备名称中英文混合，一个中文utf8编码为3字节，英文字符为1字节，混排计算长度
    QString s = ui->lineEditUserEquitmentItem->text();
    while(s.toStdString().length() > 16)
    {
        s = s.left(s.length()-1);
    }
    //SendData(FRAME_CMD_SET_DEVICE_NAME, ui->lineEditUserEquitmentItem->text().toStdString().substr(0, 16));
    SetupService::GetInstance()->SendData(FRAME_CMD_SET_DEVICE_NAME, s.toStdString());
}

//
// 设置设备编号
//
void BaseSetupWidget::slot_pushButtonUserEquitmentNo_clicked()
{
    logInfo(tr("请求设置设备序列号..."));
    SetupService::GetInstance()->SendData(FRAME_CMD_SET_DEVICE_NUMBER, ui->lineEditUserEquitmentNo->text().toStdString().substr(0, 8));
}

//
// 设置操作人
//
void BaseSetupWidget::slot_pushButtonOperatorSettings_clicked()
{
    logInfo(tr("请求设置操作人..."));
    // 操作人名称可中文可英文，一个中文utf8编码为3字节，英文字符为1字节，混排计算长度
    QString s = ui->lineEditOperatorSettings->text();
    while(s.toStdString().length() > 16)
    {
        s = s.left(s.length()-1);
    }
    SetupService::GetInstance()->SendData(FRAME_CMD_SET_OPERATOR, s.toStdString());
}

void BaseSetupWidget::slot_pushButtonGetRecords_clicked()
{
    logInfo("请求获取记录数据...");
    m_recordAllCount = 0;    // 清空文件总记录数
    m_recordCurrCount = 0;   // 清空当前收到记录数
    m_recordData.clear();    // 清空文件内容列表
    m_recordFlag = false;    // 尚未开始记录，收到起始帧才算真正的开始
    SetupService::GetInstance()->SendData(FRAME_CMD_GET_RECORD, "", 2000);
//    saveRecordToFile();
}

//
// 删除记录
//
void BaseSetupWidget::slot_pushButtonDeleteRecordedData_clicked()
{
    logInfo(tr("请求删除记录数据..."));
    SetupService::GetInstance()->SendData(FRAME_CMD_CLS_RECORD);
}

void BaseSetupWidget::slot_recvData(QString portName, unsigned char cmd, QByteArray recvData)
{
    //QMessageBox::warning(this, "Warning!", "BaseSetupWidget::slot_recvData", QMessageBox::Ok, QMessageBox::Ok);
#ifdef _DEBUG
    logInfo(tr("PORT:%1 >> Recv Data: CMD=[%2]%3").arg(portName).arg(cmd).arg(QString::fromStdString(getCmdName(cmd))));
#else
    logInfo(tr("PORT:%1 >> Recv Data: CMD=%2").arg(portName).arg(QString::fromStdString(getCmdName(cmd))));
#endif
    switch(cmd)
    {
    case FRAME_CMD_SET_TIME         : processSetTimeRsp(portName, recvData); break;
    case FRAME_CMD_GET_TIME         : processGetTimeRsp(portName, recvData); break;
    case FRAME_CMD_SET_SERIAL_NUMBER: processSetSerialNumberRsp(portName, recvData); break;
    case FRAME_CMD_GET_SERIAL_NUMBER: processGetSerialNumberRsp(portName, recvData); break;
    case FRAME_CMD_SET_DEVICE_NAME  : processSetDeviceNameRsp(portName, recvData); break;
    case FRAME_CMD_GET_DEVICE_NAME  : processGetDeviceNameRsp(portName, recvData); break;
    case FRAME_CMD_SET_DEVICE_NUMBER: processSetDeviceNumberRsp(portName, recvData); break;
    case FRAME_CMD_GET_DEVICE_NUMBER: processGetDeviceNumberRsp(portName, recvData); break;
    case FRAME_CMD_GET_RECORD       : processGetRecordRsp(portName, recvData); break;
    case FRAME_CMD_CLS_RECORD       : processClsRecordRsp(portName, recvData); break;
    case FRAME_CMD_SET_OPERATOR     : processSetOperatorRsp(portName, recvData); break;
    case FRAME_CMD_GET_OPERATOR     : processGetOperatorRsp(portName, recvData); break;
    case FRAME_CMD_SET_LOCK_STATUS  : processSetLockStatusRsp(portName, recvData); break;

    default:
        logInfo(tr("PORT:%1 >> Unsupported CMD Of Base Setup[%2]!").arg(portName).arg(cmd));
        break;
    }
}

//
// 设置时间响应
//
void BaseSetupWidget::processSetTimeRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET TIME SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET TIME SUCCESS").arg(portName));
#endif
}

//
// 获取时间响应 -- 暂无此功能
//
void BaseSetupWidget::processGetTimeRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET TIME SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> GET TIME SUCCESS").arg(portName));
#endif
}

//
// 设置出厂序列号响应
//
void BaseSetupWidget::processSetSerialNumberRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET SERIAL NUMBER SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET SERIAL NUMBER SUCCESS").arg(portName));
#endif
}

//
// 获取出厂序列号响应 -- 系统启动时自动请求获取
//
void BaseSetupWidget::processGetSerialNumberRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET SERIAL NUMBER SUCCESS![%2][%3]")
            .arg(portName)
            .arg(Utils::strToHexStr(data.toStdString()).c_str())
            .arg(data.toStdString().c_str()));
#else
    logInfo(tr("PORT:%1 >> GET SERIAL NUMBER SUCCESS").arg(portName));
#endif
    ui->lineEditToolsSerialNumber->setText(data);
}

//
// 设置设备名称响应
//
void BaseSetupWidget::processSetDeviceNameRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET DEVICE NAME SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET DEVICE NAME SUCCESS").arg(portName));
#endif
}

//
// 获取设备名称响应 -- 系统启动时自动请求获取
//
void BaseSetupWidget::processGetDeviceNameRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET DEVICE NAME SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> GET DEVICE NAME SUCCESS").arg(portName));
#endif
    ui->lineEditUserEquitmentItem->setText(data);
}

//
// 设置设备序列号响应
//
void BaseSetupWidget::processSetDeviceNumberRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET DEVICE NUMBER SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET DEVICE NUMBER SUCCESS").arg(portName));
#endif
}

//
// 获取设备序列号响应 -- 系统启动时自动请求获取
//
void BaseSetupWidget::processGetDeviceNumberRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET DEVICE NUMBER SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> GET DEVICE NUMBER SUCCESS").arg(portName));
#endif
    ui->lineEditUserEquitmentNo->setText(data);
}

//
// 设置操作人响应
//
void BaseSetupWidget::processSetOperatorRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET OPERATOR SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET OPERATOR SUCCESS").arg(portName));
#endif
}

//
// 获取操作人响应
//
void BaseSetupWidget::processGetOperatorRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET OPERATOR SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> GET OPERATOR SUCCESS").arg(portName));
#endif
    ui->lineEditOperatorSettings->setText(data);
}



//
// 获取记录响应
//
void BaseSetupWidget::processGetRecordRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> GET RECORD SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#endif
    if(data.length() < 1)
    {
        logInfo(tr("PORT:%1 >> 返回数据格式错误!").arg(portName));
        emit get_record_finish(-1);
        return;
    }
    unsigned char type = data.at(0);
    switch(type)
    {
    case 0x00:    // 起始帧
        logInfo(tr("PORT:%1 >> 文件记录 - 收到起始帧").arg(portName));
        if(!m_recordFlag)
        {
            if(data.length() < 3)
            {
                logInfo(tr("PORT:%1 >> 返回数据格式错误0x00!").arg(portName));
                emit get_record_finish(-1);
                return;
            }
            m_recordFlag = true;
            m_recordAllCount = Utils::charToShort(data.at(1), data.at(2));

            // 设置进度条可用可见
            ui->progressBarGetRecords->setEnabled(true);
            ui->progressBarGetRecords->setVisible(true);
            ui->progressBarGetRecords->setValue(0);
            startRecordTimer(1000);
        }
        break;

    case 0x01:    // 数据帧
        logInfo(tr("PORT:%1 >> 文件记录 - 收到数据帧").arg(portName));
        if(m_recordFlag)
        {
            if(data.length() < 81)  // 目前数据长度为81
            {
                logInfo(tr("PORT:%1 >> 返回数据格式错误0x01!").arg(portName));
                emit get_record_finish(-1);
                return;
            }
            // 收到数据即停止定时器，然后将数据放入队列，再启动定时器
            stopRecordTimer();
            // 将数据放入队列
            m_recordData.push_back(QString::fromLatin1(data, data.length()));
            m_recordCurrCount++;
            // 设置进度条的值
            ui->progressBarGetRecords->setValue(m_recordCurrCount / m_recordCurrCount);
            startRecordTimer(1000);
        }
        else
        {
            logInfo(tr("PORT:%1 >> Record Flag is false!").arg(portName));
        }
        break;

    case 0x02:    // 结束帧
        logInfo(tr("PORT:%1 >> 文件记录 - 收到结束帧").arg(portName));
        if(m_recordFlag)
        {
            m_recordFlag = false;
            stopRecordTimer();
            ui->progressBarGetRecords->setValue(100);
            // 将数据存为文件
            saveRecordToFile();
            emit get_record_finish(0);
            ui->progressBarGetRecords->setDisabled(true);
        }
        break;

    default:
        logInfo(tr("PORT:%1 >> Unknown Type[%1]").arg(portName).arg(type));
        break;
    }
    return;
}


//
// 清除记录按钮点击响应
//
void BaseSetupWidget::processClsRecordRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> CLS RECORD SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> CLS RECORD SUCCESS").arg(portName));
#endif
}

//
// 设置锁状态响应
//
void BaseSetupWidget::processSetLockStatusRsp(QString portName, QByteArray data)
{
#ifdef _DEBUG
    logDebug(tr("PORT:%1 >> SET LOCK STATUS SUCCESS[%2]").arg(portName).arg(Utils::strToHexStr(data.toStdString()).c_str()));
#else
    logInfo(tr("PORT:%1 >> SET LOCK STATUS SUCCESS").arg(portName));
#endif
}



//
// 初始化获取记录定时器
//
void BaseSetupWidget::initRecordTimer()
{
    m_recordTimer.stop();
    m_recordTimer.setInterval(1000);    // 本定时器定时长度可变，初始化时暂定1秒，后续通过start
    connect(&m_recordTimer, SIGNAL(timeout()), this, SLOT(slot_recordTimeout()));
}

//
// 启动获取记录定时器
//
void BaseSetupWidget::startRecordTimer(unsigned int msec)
{
    m_recordTimer.start(msec);
}

//
// 停止获取记录定时器
//
void BaseSetupWidget::stopRecordTimer()
{
    m_recordTimer.stop();
}

//
// 获取记录定时器超时处理
//
void BaseSetupWidget::slot_recordTimeout()
{
    logInfo("文件接收超时");
    if(m_recordFlag)
    {
        stopRecordTimer();
        saveRecordToFile();
    }
    //m_sysStatus = SYS_STATUS_IDLE;
    emit get_record_finish(1);
}



/*
void BaseSetupWidget::saveRecordToFile()
{
    QString currDateTime = QDateTime::currentDateTime().toString("yyyyMMddhhmmss");
    QString fileName = tr("record_%1").arg(currDateTime);
    // 打开文件保存路径
    m_recordFilePath = QFileDialog::getSaveFileName(
                this,
                tr("数据文件另存为(Save as)"),
                tr("C:/%1").arg(fileName),
                tr("Excel files(*.xlsx);;text files(*.csv)"));
    if(m_recordFilePath.length() == 0)
    {
        // 取消保存，相当于取消文件记录了
        return;
    }
    logInfo(tr("记录文件保存路径:%1").arg(m_recordFilePath));

    // 开始保存文件，将 m_recordData 中数据存储到文件中
    //获取工作簿集合
    QAxObject *workbooks = m_excelObject->querySubObject("WorkBooks");
    //新建一个工作簿
    workbooks->dynamicCall("Add");
    //获取当前工作簿
    QAxObject *workbook = m_excelObject->querySubObject("ActiveWorkBook");
    //获取工作表格集合
    QAxObject *worksheets = workbook->querySubObject("Sheets");
    //获取当前工作表格1，即sheet1
    QAxObject *worksheet = worksheets->querySubObject("Item(int)", 1);

    //产生数据
    QList<QVariant> allRowData;
    // 保存标题
    QList<QVariant> titleRowData;
    for(unsigned int i=0; i<gFieldCount; i++)
    {
        titleRowData.append(gTagRecordFile[i].fieldName);
    }
    allRowData.append(QVariant(titleRowData));


    for(int row = 1; row <= m_recordData.size(); row++)
    {
        QList<QVariant> aRowData;

        std::string rowData = m_recordData.at(0).toLatin1().toStdString();
        //std::string s;
        int nPos = 0;
        int nLen = 0;
        int nIndex = 0;

        //{"帧类型", FIELD_TYPE_UCHAR, 1},
        nLen = gTagRecordFile[nIndex].fieldLen;
        std::string s1 = rowData.substr(nPos, nLen);
        nPos += nLen;
        char val1 = Utils::strToChar(s1);
        aRowData.append(QVariant(Utils::strToChar(s1)));
        nIndex++;

        //{"序号", FIELD_TYPE_USHORT, 2},
        nLen = gTagRecordFile[nIndex].fieldLen;
        std::string s2 = rowData.substr(nPos, nLen);
        nPos += nLen;
        short int val2 = Utils::strToShort(s2);
        aRowData.append(QVariant(Utils::strToShort(s2)));
        nIndex++;

        //{"出厂编号", FIELD_TYPE_STRING, 8},
        nLen = gTagRecordFile[nIndex].fieldLen;
        std::string s3 = rowData.substr(nPos, nLen);
        nPos += nLen;
        std::string val3 = s3;
        aRowData.append(QVariant(QString::fromStdString(s3)));
        nIndex++;

        //{"日期", FIELD_TYPE_DATETIME, 7},
        nLen = gTagRecordFile[nIndex].fieldLen;
        std::string s4 = rowData.substr(nPos, nLen);
        logInfo(tr("日期： %1").arg(QString::fromStdString(Utils::strToHexStr(s4))));
        nPos += nLen;
        std::string val4 = s4;
        short int year = Utils::strToShort(s4);
        unsigned char month = s4.at(2);
        unsigned char day = s4.at(3);
        unsigned char hour = s4.at(4);
        unsigned char minute = s4.at(5);
        unsigned char second = s4.at(6);
        aRowData.append(QVariant(tr("%1-%2-%3 %4:%5:%6").arg(year).arg(month).arg(day).arg(hour).arg(minute).arg(second)));
        nIndex++;

        //{"设备名称", FIELD_TYPE_STRING, 16},
        nLen = gTagRecordFile[nIndex].fieldLen;
        std::string s5 = rowData.substr(nPos, nLen);
        nPos += nLen;
        std::string val5 = s5;
        aRowData.append(QVariant(QString::fromStdString(s5)));
        nIndex++;

        //{"设备编号", FIELD_TYPE_STRING, 8},
        //{"操作人员", FIELD_TYPE_STRING, 16},
        //{"目标扭矩", FIELD_TYPE_UINT, 4},
        //{"实际扭矩", FIELD_TYPE_UINT, 4},
        //{"螺栓规格等级编号", FIELD_TYPE_USHORT, 2},
        //{"目标角度", FIELD_TYPE_USHORT, 2},
        //{"实际角度", FIELD_TYPE_USHORT, 2},
        //{"档位", FIELD_TYPE_UCHAR, 1},
        //{"对应扭矩", FIELD_TYPE_UINT, 4},
        //{"选定模式", FIELD_TYPE_UCHAR, 1},
        //{"运行时间", FIELD_TYPE_USHORT, 2},
        //{"拧紧结果", FIELD_TYPE_UCHAR, 1}

//        for(unsigned int i=0; i<gFieldCount; i++)
//        {
//            s.clear();
//            nLen = gTagRecordFile[i].fieldLen;
//            s = rowData.toStdString().substr(nPos, nLen);
//            nPos += nLen;
//            switch(gTagRecordFile[i].fieldType)
//            {
//            case FIELD_TYPE_STRING:
//                aRowData.append(QVariant(QString::fromStdString(s)));
//                break;

//            case FIELD_TYPE_UCHAR:
//                aRowData.append(QVariant(Utils::byteStrToChar(s)));
//                break;

//            case FIELD_TYPE_USHORT:
//                aRowData.append(QVariant(Utils::byteStrToShort(s)));
//                break;

//            case FIELD_TYPE_UINT:
//                aRowData.append(QVariant(Utils::byteStrToInt(s)));
//                break;

//            case FIELD_TYPE_DATETIME:
//                {
//                    std::string s1;
//                    int nPos1 = 0;
//                    int nLen1 = 0;
//                    s1.clear(); nLen1 = 2; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned short dtYear = Utils::byteStrToShort(s);
//                    s1.clear(); nLen1 = 1; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned char dtMonth = Utils::byteStrToChar(s);
//                    s1.clear(); nLen1 = 1; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned char dtDay = Utils::byteStrToChar(s);
//                    s1.clear(); nLen1 = 1; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned char dtHour = Utils::byteStrToChar(s);
//                    s1.clear(); nLen1 = 1; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned char dtMinute = Utils::byteStrToChar(s);
//                    s1.clear(); nLen1 = 1; s1 = s.substr(nPos1, nLen1); nPos1 += nLen1; unsigned char dtSecond = Utils::byteStrToChar(s);
//                    QString dateTime = tr("%1-%2-%3 %4:%5:%6").arg(dtYear).arg(dtMonth).arg(dtDay).arg(dtHour).arg(dtMinute).arg(dtSecond);
//                    aRowData.append(QVariant(dateTime));
//                }
//                break;

//            default:
//                aRowData.append(QVariant(""));
//                break;
//            }

//        }


//        for(int column = 1; column <= 2; column++) {
//            aRowData.append(QVariant(row*column));
//        }
        allRowData.append(QVariant(aRowData));
    }



    //选取范围
    //QAxObject *range = worksheet->querySubObject("Range(const QString)", "A1:Q1");
    QAxObject *range = worksheet->querySubObject("Range(const QString)", tr("A1:Q%1").arg(m_recordData.size() + 1));
    //批量写入
    range->dynamicCall("SetValue(const QVariant&)", QVariant(allRowData));

    //设置字体大小
    //range->querySubObject("Font")->setProperty("Size", 30);
    //获取单元格
    //QAxObject *cell = worksheet->querySubObject("Cells(int, int)", 1, 1);
    //储存一个字符串数据至表格
    //cell->dynamicCall("setValue(const QVariant&)", QVariant("abc"));
    //读取单元格数据
    //QString str = cell->dynamicCall("Value2()").toString();
    //qDebug()<<"The value of cell is "<< str <<endl;
    //调整行高
    //worksheet->querySubObject("Range(const QString&)", "3:4")->setProperty("RowHeight", 60);
    //worksheet->querySubObject("Range(const QString&)", "j1")->setProperty("ColumnWidth", 80);

    //保存至文件注意一定要用QDir::toNativeSeparators将路径中的"/"转换为"\"，不然一定保存不了。
    workbook->dynamicCall("SaveAs(const QString&)", QDir::toNativeSeparators(m_recordFilePath));
    workbook->dynamicCall("Close(Boolean)", true);
}
*/


void BaseSetupWidget::saveToXlsx()
{
    QXlsx::Document xlsx;

    //产生数据
    //QList<QVariant> allRowData;
    // 保存标题
    //QList<QVariant> titleRowData;
    // 从1开始，忽略第一个
    QXlsx::CellRange range(1,1,1,18);

    xlsx.setColumnWidth(range,13);
    xlsx.setColumnWidth(4,16);
    QXlsx::Format format;
    format.setFontSize(11);
    format.setFontName(QStringLiteral("Calibri"));
    format.setVerticalAlignment(QXlsx::Format::AlignVCenter);
    format.setHorizontalAlignment(QXlsx::Format::AlignHCenter);
    for(unsigned int i=1; i<gFieldCount; i++)
    {
        xlsx.write(tr("%1%2").arg((char)('A' + (i - 1))).arg(1), gTagRecordFile[i].fieldName,format);
        xlsx.write(tr("%1%2").arg((char)('A' + (i - 1))).arg(2), gTagRecordFileEng[i].fieldName,format);
    }

    QString unit_Pressure,unit_Torque;
    for(int row = 1; row <= m_recordData.size(); row++)
    {
        int cRow = row + 2;
        std::string rowData = m_recordData.at(row-1).toLatin1().toStdString();
        logInfo(tr("data[%1]").arg(QString::fromStdString(Utils::strToHexStr(rowData))));

        std::string s;
        int nPos = 0;
        int nLen = 0;
        for(unsigned int i=0; i<gFieldCount; i++)
        {
            s.clear();
            if(i == 8)
            {
                unsigned char unit1 = Utils::byteStrToChar(rowData.substr(nPos, 1));
                nPos +=1;
                unsigned char unit2 = Utils::byteStrToChar(rowData.substr(nPos, 1));
                nPos +=1;
                switch (unit1) {
                case 0:
                    unit_Pressure = "Bar";
                    break;
                case 1:
                    unit_Pressure = "Mpa";
                    break;
                case 2:
                    unit_Pressure = "Psi";
                    break;
                default:
                    break;
                }
                switch (unit2) {
                case 0:
                    unit_Torque = "N.m";
                    break;
                case 1:
                    unit_Torque = "Ft.lbs";
                    break;
                default:
                    break;
                }
            }

            nLen = gTagRecordFile[i].fieldLen;
            s = rowData.substr(nPos, nLen);
            nPos += nLen;
            // 忽略第一个
            if(i==0)
            {
                continue;
            }

            char cCol = 'A' + (i - 1);
            QString sPos = tr("%1%2").arg(cCol).arg(cRow);
            switch(gTagRecordFile[i].fieldType)
            {
            case FIELD_TYPE_STRING:
                xlsx.write(sPos, QVariant(QString::fromStdString(s)),format);
                //aRowData.append(QVariant(QString::fromStdString(s)));
                break;

            case FIELD_TYPE_UCHAR:
            {
                unsigned char param = Utils::byteStrToChar(s);
                QString strParam;
                if(i==16)
                {
                    switch (param) {
                    case 1:
                        strParam = "Torque/扭矩";
                        break;
                    case 2:
                        strParam = "Bolt/螺栓";
                        break;
                    case 3:
                        strParam = "Gear/档位";
                        break;
                    case 4:
                        strParam = "Angle/角度";
                        break;
                    case 5:
                        strParam = "Sensor/传感器";
                        break;
                    default:
                        break;
                    }
                }else if (i==17)
                {
                    switch (param) {
                    case 0:
                        if (m_currType == m_spannerType)
                        {
                            strParam = "手动/HAND";
                        }else{
                            strParam = "Ⅰ";
                        }
                        break;
                    case 1:
                        if (m_currType == m_spannerType)
                        {
                            strParam = "自动/AUTO";
                        }else{
                            strParam = "Ⅱ";
                        }
                        break;
                    default:
                        break;
                    }
                }else if (i==18)
                {
                    switch (param) {
                    case 0:
                        strParam = "×";
                        break;
                    case 1:
                        strParam = "√";
                        break;
                    default:
                        break;
                    }
                }else
                {
                    strParam = QString::number(param);
                }
                xlsx.write(sPos, QVariant(strParam),format);
//                qDebug()<<strParam;
                break;
                //aRowData.append(QVariant(Utils::byteStrToChar(s)));

            }
            case FIELD_TYPE_USHORT:
                if(i==8)
                {
                    xlsx.write(sPos, QVariant(QString("%1 %2").arg(Utils::byteStrToShort(s)).arg(unit_Pressure)),format);
                }else
                    xlsx.write(sPos, QVariant(Utils::byteStrToShort(s)),format);
                //aRowData.append(QVariant(Utils::byteStrToShort(s)));
                break;

            case FIELD_TYPE_UINT:
                if(i==9||i==10)
                {
                    xlsx.write(sPos, QVariant(QString("%1 %2").arg(Utils::byteStrToInt(s)).arg(unit_Torque)),format);
                }else
                {
                    xlsx.write(sPos, QVariant(Utils::byteStrToInt(s)),format);
                }
                //aRowData.append(QVariant(Utils::byteStrToInt(s)));
                break;

            case FIELD_TYPE_DATETIME:
                {
                    short int year = Utils::strToShort(s);
                    unsigned char month = s.at(2);
                    unsigned char day = s.at(3);
                    unsigned char hour = s.at(4);
                    unsigned char minute = s.at(5);
                    unsigned char second = s.at(6);
                    QString dateTime = tr("%1-%2-%3 %4:%5:%6").arg(year).arg(month).arg(day).arg(hour).arg(minute).arg(second);
                    xlsx.write(sPos, QVariant(dateTime),format);
                    //aRowData.append(QVariant(dateTime));
                }
                break;

            default:
                xlsx.write(sPos, QVariant(""),format);
                break;
            }
        }
    }

    xlsx.saveAs(m_recordFilePath);
}


void BaseSetupWidget::saveToCsv()
{
    QFile file(m_recordFilePath);

    if (!file.open(QIODevice::WriteOnly|QIODevice::Text))
    {
        QMessageBox::warning(this, "warning", tr("文件保存失败！"), QMessageBox::Ok, QMessageBox::Ok);
        return;
    }

    std::stringstream ssTitle;
    // 从1开始，忽略第一个
    for(unsigned int i=1; i<gFieldCount; i++)
    {
        ssTitle << gTagRecordFile[i].fieldName.toStdString() << ",";
    }
    ssTitle << std::endl;
    file.write(ssTitle.str().c_str(), ssTitle.str().length());

    for(int row = 1; row <= m_recordData.size(); row++)
    {
        std::string rowData = m_recordData.at(0).toLatin1().toStdString();
        std::stringstream ss;
        logInfo(tr("data[%1]").arg(QString::fromStdString(Utils::strToHexStr(rowData))));
        std::string s;
        int nPos = 0;
        int nLen = 0;
        for(unsigned int i=0; i<gFieldCount; i++)
        {
            s.clear();
            nLen = gTagRecordFile[i].fieldLen;
            s = rowData.substr(nPos, nLen);
            nPos += nLen;
            // 忽略第一个
            if(i == 0)
            {
                continue;
            }
            switch(gTagRecordFile[i].fieldType)
            {
            case FIELD_TYPE_STRING:
                ss << s << ",";
                break;

            case FIELD_TYPE_UCHAR:
                ss << (Utils::strToChar(s) - '\0') << ",";
                break;

            case FIELD_TYPE_USHORT:
                ss << Utils::strToShort(s) << ",";
                break;

            case FIELD_TYPE_UINT:
                ss << Utils::strToInt(s) << ",";
                break;

            case FIELD_TYPE_DATETIME:
                {
                    short int year = Utils::strToShort(s);
                    unsigned char month = s.at(2);
                    unsigned char day = s.at(3);
                    unsigned char hour = s.at(4);
                    unsigned char minute = s.at(5);
                    unsigned char second = s.at(6);
                    QString dateTime = tr("%1-%2-%3 %4:%5:%6").arg(year).arg(month).arg(day).arg(hour).arg(minute).arg(second);
                    ss << dateTime.toStdString() << ",";
                }
                break;

            default:
                ss << ",";
                break;
            }
        }

        ss << std::endl;

        file.write(ss.str().c_str(), ss.str().length());
    }


    file.close();
}


//
// 保存记录到文件
//
void BaseSetupWidget::saveRecordToFile()
{
    QString currDateTime = QDateTime::currentDateTime().toString("yyyyMMddhhmmss");
    QString fileName = tr("record_%1").arg(currDateTime);
    // 打开文件保存路径
    m_recordFilePath = QFileDialog::getSaveFileName(
                this,
                tr("数据文件另存为(Save as)"),
                tr("C:/%1").arg(fileName),
                tr("Excel files(*.xlsx);;text files(*.csv)"));
    if(m_recordFilePath.length() == 0)
    {
        // 取消保存，相当于取消文件记录了
        return;
    }
    logInfo(tr("记录文件保存路径:%1").arg(m_recordFilePath));

    QFileInfo fileInfo(m_recordFilePath);
    if(fileInfo.suffix().toLower().compare("xlsx") == 0)
    {
        saveToXlsx();
    }
    else // 默认均保存为csv格式  // if(fileInfo.suffix().toLower().compare("csv") == 0)
    {
        saveToCsv();
    }

    QMessageBox::warning(this, "Warning!", "文件保存完毕!", QMessageBox::Ok, QMessageBox::Ok);
}